Docking Port: Difference between revisions

From Official Barotrauma Wiki
Jump to: navigation, search
Tag: visualeditor-switched
(Moved everything from this page to Docking Port & Hatch. Redirect to Docking Port & Hatch)
Tags: New redirect visualeditor-switched
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
{{Version|0.12.0.3}}
#REDIRECT [[Docking Hatch & Port]]
{{Installations infobox
| imagewidth = 100
| identifier = dockingport
| description = A vertically aligned docking interface. Locks to another docking port to form a watertight seal and allow passage between subs, shuttles and locations.
| tags = dock
}}
{{Installations infobox
| name = Docking Hatch
| imagewidth = 100
| identifier = dockinghatch
| description = A horizontally aligned docking interface. Locks to another docking hatch to form a watertight seal and allow passage between subs, shuttles and locations.
| tags = dock
}}
The '''Docking Port''' and '''Docking Hatch''' are [[:Category:Installations|Installation]] used to dock two submarines together. The Docking Hatch connects to another Docking Hatch vertically, and the Docking Port connects to another Docking Port horizontally.
 
=Function=
When 2 docking ports are docked to each other, air, water, items, power, and creatures can move between subs through the docking port.
 
A Docking Hatch is required to dock with an outpost as Outposts only have a Docking Hatch.
 
=Usage=
When docked, the ports will:
* transfer power between each other.
* create a dynamic hull between the two installations. This hull protects the area from the sea.
* emit a "1" signal to any wire connected to the "STATE_OUT" pin
 
=Connection Panel=
<small>Hover over pins to see their descriptions.</small>
{{Connection panel
| input1 = Toggle_State
| input1tt = Docks/Undocks when a signal of 1 is supplied.
| input2 = Set_State
| input2tt = Sets the state of the docking port (1=dock, 0=undock)
| input3 = Power
| input3tt = Transfers power between wires connected to the pin.
| input3color = red
| output1 = State_Out
| output1tt = Sends the current state of the docking port (1=docked, 0=undocked)
| output2 = Proximity_Sensor
| output2tt = Outputs a signal of 1 when within docking range docking port.
}}
 
=Media=
<gallery widths=200 heights=100>
DockingPort1.ogg|Sound when docking
DockingPort2.ogg|Sound when undocking
</gallery>
{{Installations nav}}

Latest revision as of 23:47, 13 December 2022