Template:Stub
| Pumps
|
|
| Statistics*
|
| Power Consumption
|
1000 kW
|
| Technical
|
| Identifier
|
{{{identifier}}}
|
| Categories
|
Misc
|
|
The pump is a useful installation found in Subsurface. It is used to pump water either out of or into the submarine.
Function
When the pump is active, it will begin pumping water.
I/O Interface
Connection Panel for Pumps
Hover over pins to see their descriptions.
|
|
|
power_in
|
|
|
|
|
|
toggle
|
|
|
|
|
|
set_active
|
|
|
|
|
|
set_speed
|
|
|
|
|
|
set_targetlevel
|
Connecting a power source to this input will supply the pump with power.
|
|
|
Turns the pump on/off whenever a signal is received.
|
|
|
Turns the pump off when a signal "0" is received, and activates it when any other signal is received.
|
|
|
Sets the speed of the pump to the received value. The value is clamped between -100.0 and 100.0.
|
|
|
Sets the target water level in the room to the received value. 0.0 means that the pump will try to empty the room completely, 50 means that it will try to fill the room half way and 100.0 means that it will try to fill the entire room with water. The value is clamped between 0.0 and 100.0.
|
|
Requires:  Screwdriver
|
