|Power Consumption||None kW|
The Junction Box can take five different wires each connected to the one power output and the four signal outputs. If junction boxes are provided with 4.000 power units more than used by the connected devices or submerged in water, they overload and become unusable until repaired. This is a potentially dangerous situation, as important installations and items can thus become unpowered during an emergency situation. For this reason, it is usually unwise to connect more than one reactor to a chain of junction boxes without taking precautions. As well, it is best to keep the junction boxes away from water as much as possible.
You can only connect 5 things to it.
In order to edit the connections on a junction box, a screwdriver must be equipped in one of the two hand slots, and then the Junction Box left-clicked when highlighted. To add a wire to a connection, a wire must be equipped in the other hand, either before or after the Junction Box has been left-clicked.
||Explosion Radius (m)|
|Junction Box overload
|Connection panel for Junction Box|
Hover over pins to see their descriptions.