The Junction Box distributes Electricity and Signals through its connected wires. Like all other wireable installations, every pin can have up to five connected wires.
Junction boxes deteriorate over time while powered, when overloaded with power beyond their overload threshold, when powered and in water, and when on fire. The overload threshold for damage on most vanilla Submarine's junction boxes is 1.7.
Overvoltage / Undervoltage
The Junction Boxes require as much power as the current sum of the ships powered electrical devices. If this value of what the systems of the submarine changes rapidly, the submarine's junction boxes will either light up with Overvoltage or Undervoltage.
- Example Undervoltage: The submarine is not moving, engine iis off. The reactor is not producing a lot of heat. Then the order is given on the navigation terminal to maximize speed (by clicking far away from the submarine in the nav terminal, resulting in a long arrow on the nav terminal. A longer arrow, more engine activity). Now, a reactor on automatic control will crank up the reactor heat as quickly as it can to meet this new demand. While the reactor struggles to meet the required amount of power, Undervoltage happens. This will result in brownouts. Stuff not working, not enough power to go around. The Junction Box Undervoltage light will be lit. It has no other effects, and the brownouts will cease when reactor has reached the threshold required by the engine activity.
- Example Overvoltage: The submarine is moving at full speed. Forward speed is then reduced to 0 on the Nav Terminal (by clicking on the submarine or close to it in the nav terminal, resulting in a short arrow or no arrow on the nav terminal. A shorter arrow, less engine activity). Now, a reactor on automatic control will lower the reactor heat as quickly as it can to meet this new demand. BUT the reactor may take some time to adjust to this. It may still pump out lots of heat, heat that is now not used by the slowing engine. That excess heat goes into the wire system and the junction boxes Overvoltage Lights will be lit. The Junction Box will suffer deterioration and will eventually fail and burn, unless the reactor is able to reduce its heat output to match the level required by the engine activity. Without doing a lot of wiring, a few things can be done to mitigate overvoltage:
- The crew can buy submarine upgrades to lower the junction box damage from overvoltage
- The captain can avoid going from engine activity = max to engine activity = none. By slowly reducing speed and thus allowing the reactor heat to adjust to the changing engine activity.
In order to edit the connections on a junction box, a screwdriver must be equipped in one of the two hand slots, and then the Junction Box left-clicked when highlighted. To add a wire to a connection, a wire must be equipped in the other hand, either before or after the Junction Box has been left-clicked.
Unsuccessfully attempting to repair a Junction Box damages the user.
|| Burn : 5
Stun : 5
Junction Boxes take damage while in water, and if they are overvolted beyond their overvolt protection limit:
|Submerged in water||0.25/second|
|Overvolted beyond limit||10.0/second|
|Connection panel for Junction Box|
Hover over pins to see their descriptions.